Meru Networks 4339B Installationsanleitung PDF herunterladen (Seite 54)

Installing the Access Points

AP150 Required Tools

Installing the Access Points

Selecting a Location

The AP150 requires a location that meets the following criteria:

z Relatively unobstructed access to the stations the AP serves

z Power over Ethernet (PoE) connection to the network switch servicing the

controller.

APs can obtain their power from 802.3af standard Power over Ethernet (PoE)-compat-

ible network switch or PoE power injector installed between the switch and the

AP150.

AP150 and AP300 work with all switches that support STANDARD 802.3af.

Select a location with minimal physical obstructions between the AP and the wireless

stations. In an office with cubicles, mounting the APs below a hanging ceiling or the

wall near the ceiling provides the least obstructed communications path.

Most installations receive the best coverage using the following guidelines:

Install APs toward the center of the building.

Installation Type Tools Required

Horizontal mounting None

Vertical mounting over a wall stud

z Drill

z 1/8"drill bit

z Screwdriver

z 1/8"Allen wrench

Vertical mounting on sheetrock

z Drill

z 3/16" drill bit

z Screwdriver

z 1/8"Allen wrench

Horizontal mounting below a

hanging ceiling

z Screwdriver

z Wrench or pliers

z 1/8"Allen wrench

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 118 119

Keine Kommentare

Meru Networks 4339B Installationsanleitung Seite 54